PF 10 series filters

The PF-10 series filters utilized a 3rd party filter vessel for the most part. These vessels came complete to Puroflux with all internals which were typically ABS or polycarbonate. Some might consider these materials inferior to the S80 PVC internals we use on our fabricated stainless and carbon steel units. Furthermore, those internals provided with the fiberglass vessel were not capable of maintaining the finer media offerings. 10-micron media was the low limit. Just the same, with a small understanding of filtration principles you will realize decent removal results for fractional micron particles. In any case; to utilize the finer media offerings (5 and 0.5 microns) you must upgrade to the PF-20, PF-30, or PF-40 series on open applications.

Lastly, a 36” vessel is designed for 140 GPM side stream applications based on 20 GPM / ft2 flux. For applications such as full flow or single pass; we recommend a slower flux to optimize filtration media capabilities. This slower flux can be anywhere from 10 GPM to 5 GPM / ft2 flux. In essence a filter vessel two to four times larger.

Puroflux Filter Media Guide

{pdf}http://coolingtowerfiltrationontario.com/images/stories/pdf/puroflux_filtermedia_guide.pdf|width:450|height:600|app:google{/pdf}

Indexing Filter/Flatbed Filter Media.

30% increased flow over poly based medias.

Standard widths, 18”, 27”, 39”, 51”, 60”, 70” 96”, custom widths available.

Standard roll lengths, 200, 250 & 500 yards, Standard micron , 5, 8, 12, 16, 20 ,25, max = 200 microns, weight oz/sq.yd, 0.7, 1.0, 1.5, 2.0, 2.5, 3.0.

Sweeper Packages PF 20 & 30

pf-20Typical Sweeper Piping Installation for Open Cooling Towers

Sweeper Packages PF-64 Series

pf-60Typical Open Tower Sweeper Piping Installation

Dual Point Pressure Gauges

  • 11 Dual-Pointer-PresGauge-485px_001

    The dual pointer pressure gauge has a second pointer that will measure pressure spikes. The pointer must be manually reset. If the normal system operating pressure is 60 psi and a pressure spike of 180 psi occurs the second pointer will stay at 180 and the 1st pointer will drop to 60 psi.
  • 12 Dual-Pointer-PresGauge-485px_002

    With a standard pressure gauge you would not know if a spike occurred unless it happened if you observed the gauge. Since gauges are not monitored 24/7 most pressure spikes going unrecorded. Broken pipes, valves fittings & blown gaskets are the results of over pressurization.

  • 13 Dual-Pointer-PresGauge-485px_003

    Since gauges are not monitored 24/7 most pressure spikes going unrecorded. Broken pipes, valves fittings & blown gaskets are the results of over pressurization.

.5 micron Stainless Steel Filter Package with SS Wedge Wire Laterals

SS PF 20 Pkg 003

Cooling Tower Filtration Package Manulife Centre (Toronto, Ontario)

  • ManulifecentreToronto 001
  • ManulifecentreToronto 002

IBM Data Centre Barrie

  • IBM-Data-Centre-Barrie-001
  • IBM-Data-Centre-Barrie-002

Magnetic filters remove ferrous and nonferrous contamination

Magnetic filters equipped with powerful magnets, effectively filter and remove ferrous and nonferrous contamination in hydraulic fluid, fuel, gas, air, oil, coolant, process/effluent water and amine.

Woodbridge Whitchurch-Stouffville Whitby Vaughan
Uxbridge Unionville Toronto Thorn Hill
Richmond Hill Pickering  Peterborough Oshawa
Oakville   North York  Newmarket Mississauga
 Milton Scarborough   Markham King
 Hamilton  Etobicoke  Cambridge Burlington
Brampton Barrie Aurora Ajax
Guelph Brantford Kitchener Waterloo
Stratford London Leamington St. Thomas

Cooling Tower Filtration Ontario

Specialists in valve selection/automation, designing filtration systems, and servicing temperature transfer equipment.

Heat Exchanger Service 

Heat Exchanger Ontario

Need a replacement Plate & Frame gasket? Heat Exchanger Service? Let Heat Exchanger Ontario Service You!

Ontario Magnet

Your Magnetic Filtration source in Toronto [GTA], Ontario and across Canada. Contact Ontario Magnet for you magnetic filter requirements.

Total Heat Exchanger Solutions

Total Heat Exchanger Solutions is your Plate & Frame Heat Exchanger Service Solution, Along with Shell & Tube Heat Exchanger Service Canada Wide.